• 01886 884 595
  • hardmetlandforce@btinternet.com

STUMP GRINDER F 500 / FZ 560 T / FZ 700



Landforce

27 > 38hp kohlor Petrol Engine:

MACHINE SPECIFICATION

Engine

Kohlor Command 27 hp > 38 air cooled 4 Stroke engine

Fuel

Petrol 95 Oct: Un-Leaded

Cutting Head Diameter

510 mm (20”) Cutting Width 70 mm Swivel Action

Cutting range

Above Ground 440 mm Under Ground 300 mm operating Range > 940 mm Stump Dia:

Blades

  18 Cutter blades Multi Tip Regrindable fully hardened

Throughput

Up to 8 Metres Cube Per Hour

Drive

Direct 2 belts Travel Speed 2.40 MPH

Ave. Chip Size

11mm

Weight

760 > 800 kg inc.full tank of fuel and other fluids

Brake    

                                                                                          Hydro-Mechanical / Automatic

 

 

 

F 500 Stump Grinder: 

FEATURES AND BENEFITS

One of the most comprehensive range of Stump Grinders for the Larger land Contractor, Tree Surgeon needing to work quicklyso a Stump Grinder with a high work-rate, being strong and powerful enough to take demanding situations without complaint is always top of the requirement list. With these demands, uptime is a priority. This is really a high end trade machine.

Stump Grinder F500 is designed for Stump Grinding of Tree Stumps up 940 mm Diameter and 440 mm above ground and 300 mm below ground. The cutting system consists of a disc with 18 cutting MultiTip Blades that can be reground many timesDue to its swivel arm this machine newly facilitates joy stick control swinging motions of the head also horizontally. Hydro-Mechanical Automatic locks its chassis and easy machine attendance facilitate any handling. Its base and overall width of 1045 mm to1250 mm with dual wheels. Instantaneous activation of the cutting head brake after release of the dead-man lever on the grip reduces the run-out time of the head to 4 seconds. The propulsion system is a Kohlor Command engine with capacity of 27 > 38 hp. 16 litre fuel tank allows several hours’ work in the field. A Stump Grinder providing high end commercial- grade solution for your stump grinding needs when a very strong machine is your top priority.

The essential equipment of the Stump Grinder includes all operator controls are located on a Control Panel behind a safety shield for safe and easy operation. 

Stump Grinder F 500 has got the EC Type- Approval Certificate.

Chips made the F 500 can be used as a solid fuel for heating in buildings (burning in ovens/stoves), as raw material to produce compost, for decorative purposes in gardens, parks and paths etc., and after additional disintegrating in a mill for production of pellets and briquettes.

  • Extra heavy duty rotor. Exceptional Cutting Power.
  • Fast feed speed Consistent and useable wood chip
  • Easy access rotor.
  • 18 Blades re-grindable cutter blades reduced cutting forces and decreased engine load

Landforce Stump Grinder F 500, Offers big performance, easy to service, longevity and high resale value. This over engineered for reliable and high performance 510 mm Disc Stump Grinder at value for money price.

MACHINE SPECIFICATION

Engine

Parker Hydraulic Motor / PTO 30 > 50 hp / Kohler 27 > 38 hp

Fuel

Hydraulic Out Put 350 bar / 95 unleaded oct:

Cutting Head Diameter

710 mm (28”) Cutting Width 70 mm Swivel Action / 510 mm Tractor unit

Cutting range

According to the Vehicle attached to

Blades

  10 Cutter blades Multi Tip Regrindable fully hardened / 18 on Tractor PTO

Throughput

Up to 8 Metres Cube Per Hour

Drive

Hydrostatic

Ave. Chip Size

11mm

Weight

180 > 264 kg Inc. full tank of fuel and other fluids

Brake   

                                                                                                                                       Hydro-Mechanical / Automatic

 

 

Hanging Stump Grinder for J C B / Case / Tele-loader / Tractor

FZ 560T / FZ 700 Stump Grinder: 

FEATURES AND BENEFITS

One of the most comprehensive range of Stump Grinders for the Larger Estate Land Contractor, Tree Surgeon needing to work quickly, so a Stump Grinder with a high work-rate, being strong and powerful enough to take demanding situations without complaint is always top of the requirement list. With these demands, uptime is a priority. This is really a high end Estate or Contractor machine.

Stump Grinder FZ 510 and FZ 700 is designed for Stump Grinding of Tree Stumps of unlimited diameter and unlimited above ground and unlimited below ground. The cutting system consists of a disc with 10 cutting MultiTip Blades that can be reground many times. Due to its swivel arm this machine newly facilitates joy stick control swinging motions of the head also horizontally.  Instantaneous activation of the cutting head brake after release of the dead-man lever on the grip reduces the run-out time of the head to 4 seconds. The propulsion system is a Parker Hydraulic Motor with capacity of 350 bar or Kohler Engine 27 > 38 hp. 11 litre fuel tank allows several hours’ work in the field. A Stump Grinder providing a high end commercial- grade solution for your stump grinding needs when a very strong machine is your top priority.

The essential equipment of the Stump Grinder includes all operator controls are located on a Control Panel behind a safety shield for safe and easy operation.

Stump Grinder FZ 700 has got the EC Type- Approval Certificate.

Chips made the FZ 700 can be used as a solid fuel for heating in buildings (burning in ovens/stoves), as raw material to produce compost, for decorative purposes in gardens, parks and paths etc., and after additional disintegrating in a mill for production of pellets and briquettes.

  • Extra heavy duty rotor. Exceptional Cutting Power.
  • Fast feed speed Consistent and useable wood chip.
  • Easy access rotor.  Storage Stand.
  • 10 Blades re-grindable cutter blades reduced cutting forces and decreased engine load
  • Landforce Stump Grinder FZ510 and FZ 700, Offers big performance, easy to service, longevity and high resale value this over engineered for reliable and high performance 510 or 710 mm Disc Stump Grinder at value for money.

 

Here at Hardmet Landforce, we are also pleased to be able to offer you finance options to suit individual budgets.

Please Enquire within to discuss our 2, 3 & 4 year plans 

img-british-manufactured

Head Office – Sales and Service Department

Email: hardmetlandforce@btinternet.com

Evesham Office : 01386 443066

Bruff Office : 01886 884595